Testing and piloting

But modern efficient technologies for water purification consume a significant amount of electricity. When developing technology At Dyclar, the issue of reducing energy consumption was one of the key issues along with improving efficiency and durability.

The carbon intensity of 1 kWh is 358 g of CO2 (as of 2016). Treatment plants constructions operate 8700 hours a year. eWe will carry out a comparative calculation of energy consumption different technologies.

Execution option
Demoplant
Performance 0.25-0.4 m3/h
Format free 1 time
Execution option
Container
Performance 20 / 60 m3 l/h
Format arrange
Execution option
Reconstruction
Performance any
Format operating experience
PARAMETERS MEANING
Flow rate (performance), lit/hr 200 — 500
Inlet pressure, bar 3…4
Pressure drop in/out, bar < 1.5
Power consumption, kWt < 3
Weight, kg Without water
400
Dimensions. mm (LxWxH) 1320 x 740 x 2170
Ambient temperature +3 C … +60 C

You can test the technology on site using a container unit. Such units do not differ in their performance from stationary plants.

At the same time, they can be mobile, and the nominal production period for these versions is shorter.

 

PARAMETERS MEANING
Performance, m3/h Nominal/Peak
20 m3/h
Source Water Pressure, bar 3÷6 (to be confirmed)
Output Pressure Loss, bar Not more than 1.5 bar (to be confirmed)
Drain Waters Amount
% of performance		 3÷7%
Electrical Energy Consumption Not more than 30 kW
Mass Empty 14 tons
Loaded 22 tons
Demensions. mm (LxWxH) 12,192 x 2,438 x 2,896
Required Space 30 m2
Outdoor Climatic Conditions From -50°C to +50°C

 

STAGES 1TH MONTH 2ND MONTH 3RD MONTH 4TH MONTH
Internal Devices ✦ ✦
Units for preparing and dosing reagents ✦
Remanifolding the technological workflow
and applying anti-corrosion protection		 ✦ ✦
Assembly Supervision Works ✦
Delivery of Reagents ✦
Start-up and Commissioning ✦

Order of conduct pilot tests

Stage 1
Before the start of the PI, the representatives of OVT, LLC, together with the Customer’s specialists, determine and agree on the start time of the tests.
Stage 2
In the course of PI, according to the data obtained from analytical control, the specialists of OVT ITs LLC correct and determine the optimal dosage of reagents.
Stage 3
Based on the results of the PI and the data of analytical control of the incoming and treated water, the specialists of LLC «EC» OVT "develop and agree with the representatives of the Customer a report on the results of the tests.

Technological scheme